Buy Now

 
MXL2 is the new AiM dashlogger providing all the info needed
by professional racers as well as by newbies. The product has been designed with the aim
to make configuration and usage smooth and easy either for amateurs and for people with
sophisticated technical background.
MXL2 acquires and displays data coming from your ECU,
the internal accelerometer and gyro, as well as from the GPS module included in the kit,
analog/digital inputs and predefined math channels. Performance and data acquired can also
be incremented adding up to eight expansion modules.
 
 
 
 
 
 
 
ECU connection
 
Analog/digital inputs
 
GPS Module
 
Second CAN
 
 
       
 
Internal accelerometer and gyro
 
Math channels
       
 
 
You can define up to eight different custom pages, choosing among a wide library of page
styles, defining which data to be shown, their end of scale and measure units. Here, examples
of pages with 1, 2, 3 or 4 different data and the track map:
 
 
 
The MXL2 display features a high contrast traditional LCD,
with a black to white ratio nearly double its predecessor, fused with a graphical LCD offering
great flexibility in information display and alerts. The MXL2 now offers a dual colored backlight of high contrast white and red which can also be changed
conditionally.An ambient light sensor keeps the backlight at optimum brightness levels.
 
 
 
Six different alarm LEDs: you choose the conditions, the colors and the flashing frequency.
You can configure them in order to turn them on/off depending on analog or digital inputs,
ECU values, expansion values, GPS information or math channels.
 
 
You can also associate an alarm LED a message and a digital output with each event.
 
 
 
MXL2 features two digital outputs. Each of them can give
an output of 1 amp at 12 volts: they can be configured in order to be turned on/off depending
on the value of the analog or digital inputs. They permit to automatically run external
systems, i.e. to switch on/off additional lights, to activate/de-activate a cooling fan
or circulation pumps, etc. when a certain event happens.
 
 
 
           
 
             
 
 
An integrated shift light is a hallmark of the MXL, but an even better 10 LED shift light
array is found in the MXL2. Choose from a host of advanced
multicolored RGB shift light patterns that can be customized to your liking, and for each
unique gear when required.
 
 
 
 
Are you an MXL (Strada or Pista) owner? Connecting the MXL2 to your car is very easy.You do not need to cable your car again: just connect the specific
adapter harness to your standard AiM MXL harness and immediately exploit the huge potential
of the newest MXL2.
 
 
 
 
           
 
 
           
 
 
Using the built-in CAN bus, you can add expansion modules to the MXL2 to increment the performance and the data acquired:
 
GPS ModuleThanks to GPS05 Module (included in the kit) and its GPS Manager software, you can immediately get laptimes and all data needed for engine tuning as well as for improving driving technique.
 
Channel Expansion

It permits to add 4 0-5Volt analog channels for pressure, temperature sensors and potentiometers. Two of these channels can
be configured to receive digital inputs like wheel speed.
 
TC Hub

It adds 4 K thermocouples.
 
LCU-One Lambda Controller Wide band Lambda controller LCU-One, with Bosch LSU 4.9 probe, providing all Air/Fuel data, lambda value and exhaust gas temperature, allows to perfectly tune the carburetion.
 
SmartyCam HD cameras The on-board cameras that overlays on videos the data sampled by your logger.
 
Firmware under development:
 
Memory ModuleThanks to the SD Card, Memory Module can record all your data in a file that can be downloaded on your PC for post-analysis. Memory Module, with 16Gb capability, can be connected via CAN-Bus to MXL2 and to all AiM loggers.
 
 
 
           
 
Connection examples
           
 
 
Race Studio 3 is the heart of your MXL2, managing all your activities
related to:

 

Configuration With Race Studio 3 you can create, modify, delete, import and export configurations with all channels, ECU
drivers, Math channels, Display Pages, Digital outputs, Alarms, Shift Lights and all the
expansions you need. You will also be able to manage the map of all your racing tracks
and compare two laps watching the video recorded by SmartyCam HD cameras.

 
 
Analysis With Race Studio 3 you can also analyse all data recorded by MXL2 and downloaded
to your PC: graphs, histograms and tables will help you study your performance, providing
an objective support to avoid mistakes and improve performances.
 
 
 
AiM LearnFast E-training Series Check out how to use Race Studio 3 Configuration:
Part 1Part 2
 
 
 
 
Configure, calibrate and download your data wirelessly over a secure 802.11 WiFi connection.